I'm renovating my Burleigh Heads cottage — what electrical work needs a licensed electrician?

All wiring work in Queensland must be performed by a licensed electrician. This includes installing power points and light fittings (not just replacing like-for-like), running new circuits, adding circuit breakers or safety switches, and any switchboard work. If your renovation involves extending the kitchen, adding a bathroom, or reconfiguring rooms, you will need a licensed electrician for those stages. FitElec can review your renovation plans and provide a scope before you start.

Can you install an EV charger at my Burleigh home?

Yes. FitElec installs dedicated EV charging circuits and wall chargers for residential properties in Burleigh Heads. A dedicated circuit (separate from your general power circuits) is the recommended approach — it prevents the charger from overloading shared circuits and allows you to charge at the maximum rate your vehicle supports. Jayson will assess your switchboard capacity and recommend the right charger specification for your vehicle.

Will adding solar to my Burleigh home require an upgraded switchboard?

Sometimes. If your existing switchboard doesn't have the capacity for the solar inverter circuit or lacks RCD protection on existing circuits, a switchboard upgrade will be included in the solar quote. Jayson assesses the switchboard as part of the solar design process so this is identified upfront rather than discovered on installation day.

Electrician Burleigh Heads | Renovations & Solar | FitElec

Electrician for Burleigh Heads renovations, solar installations and coastal homes.

Burleigh Heads has spent the past decade transforming from a quiet beachside suburb into one of the Gold Coast's most popular lifestyle destinations. That transformation is written in the housing stock: original 1950s to 1970s timber and fibro cottages alongside new luxury townhouses, high-end cafes in renovated buildings, and boutique commercial premises lining the main strips. The renovation wave driving this change creates consistent work for licensed electricians — original wiring, old ceramic fuse boards and single-circuit layouts that were never designed for modern appliance loads all need to be brought up to standard before or during renovation. FitElec continues to serve Burleigh Heads from its base around Tweed Heads, with electrical repairs, renovation wiring, solar, batteries and air conditioning available. Call Jayson to discuss the property and arrange a visit. Queensland Electrical Contractor Licence #1505994 applies to work in Burleigh Heads and the surrounding Queensland suburbs.

The original homes in Burleigh Heads were built for a simpler era of electrical consumption — a few power points per room, one lighting circuit for the whole house, and no air conditioning. Today the same homes are expected to support multiple air conditioning units, induction cooktops, EV chargers, home offices and outdoor entertainment areas. That load growth on original wiring is why renovation electrical in Burleigh is rarely as simple as adding a power point — it often triggers a switchboard upgrade, additional circuits and a rewire of degraded sections. FitElec handles the full scope, from structural assessment through to Certificate of Compliance.

Electrical services in Burleigh Heads

Renovation electrical — Burleigh Heads renovations — whether a kitchen upgrade, bathroom addition or full knockdown rebuild — require electrical work that ties new circuits into existing wiring while meeting current Queensland standards. FitElec assesses the existing installation, identifies what needs upgrading, and delivers the renovation electrical to specification with a Certificate of Compliance on completion.
Solar and battery installation — Burleigh Heads' eco-conscious community has one of the Gold Coast's higher rates of solar adoption. FitElec designs and installs grid-connected solar systems and battery storage for homes and businesses in Burleigh — sized to match actual energy usage rather than a generic per-panel estimate. Energex grid connection is managed as part of the installation.
EV charger installation — EV uptake in Burleigh Heads is growing as eco-conscious residents replace petrol vehicles. FitElec installs dedicated EV charging circuits and wall chargers for residential and commercial properties — a dedicated circuit is safer and more reliable than using a standard GPO. Installation includes a dedicated breaker and earth leakage protection.
Switchboard upgrades — Many Burleigh Heads homes still have the original switchboard — often a ceramic fuse board or early plastic consumer unit without RCD protection. FitElec replaces these with modern switchboards that include RCD safety switches on all circuits, additional circuit capacity for air conditioning and appliances, and a surge protection device where specified.
LED downlight upgrades — Replacing halogen downlights is one of the simplest high-impact upgrades in a Burleigh renovation. FitElec supplies and installs quality LED downlights with appropriate IC-F rating for insulated ceilings, switching configurations to suit the room layout and dimmer compatibility where requested. The energy saving over halogen is immediate and significant.
Outdoor and alfresco electrical — Burleigh's outdoor lifestyle means electrical work outside the home — alfresco areas, garden lighting, outdoor GPOs for entertaining and security sensor lighting for coastal properties. FitElec installs weatherproof outdoor electrical with appropriate IP ratings for the coastal environment and correct circuit protection for outdoor locations.

Why Gold Coast locals choose FitElec

Local knowledge of Burleigh's housing stock — Jayson grew up working across the Burleigh corridor and knows the common issues in the area's original housing stock — the wiring methods used in 1960s and 1970s Burleigh homes, where to expect aluminium wiring, and which switchboard configurations are likely to be found in which era of construction. That local knowledge means faster diagnosis and fewer surprises on the job.
Full renovation capability — Renovation electrical in Burleigh Heads is rarely a single task. FitElec handles the full scope — assessment, demolition-stage rough-in, switchboard upgrade, new circuit installation, fit-off and certification — so you are not co-ordinating multiple electrical contractors across your project. One licensed contractor from first fix to completion.
Solar system sizing done properly — A common frustration in the Burleigh solar market is systems that were sized too large for the available roof, too small for actual usage, or pointed at the wrong aspect. Jayson designs solar systems around your actual power bills, your roof's orientation and shading profile, and your future load projections — not a per-panel sales pitch.

Burleigh Heads electrician FAQ

I'm renovating my Burleigh Heads cottage — what electrical work needs a licensed electrician?: All wiring work in Queensland must be performed by a licensed electrician. This includes installing power points and light fittings (not just replacing like-for-like), running new circuits, adding circuit breakers or safety switches, and any switchboard work. If your renovation involves extending the kitchen, adding a bathroom, or reconfiguring rooms, you will need a licensed electrician for those stages. FitElec can review your renovation plans and provide a scope before you start.
Can you install an EV charger at my Burleigh home?: Yes. FitElec installs dedicated EV charging circuits and wall chargers for residential properties in Burleigh Heads. A dedicated circuit (separate from your general power circuits) is the recommended approach — it prevents the charger from overloading shared circuits and allows you to charge at the maximum rate your vehicle supports. Jayson will assess your switchboard capacity and recommend the right charger specification for your vehicle.
Will adding solar to my Burleigh home require an upgraded switchboard?: Sometimes. If your existing switchboard doesn't have the capacity for the solar inverter circuit or lacks RCD protection on existing circuits, a switchboard upgrade will be included in the solar quote. Jayson assesses the switchboard as part of the solar design process so this is identified upfront rather than discovered on installation day.

Nearby suburbs: Miami, Mermaid Beach, Palm Beach.

Call 0425 663 172 or request a free on-site quote.